Resin Lineups
We are developing our resin with unique features to enhance the capabilities of MITS 3D priter.
MITS resin can be used individually or two different resins can be mixed for adjusting softness. For example, mix Shore A5 resin with Shore A13 gets A30 or A40 depending on the mixture ratio.
Shore A25 Rebounding resin NEW
Printed model made by this resin has features of quick rebounding when bended. Suitable application would be pneumatic pump, actuator, tire and things need kick back.
Shore A2 Rubber-like resin NEW
Formerly Shore A5 was our first in the world soft resin and now we release Shore A2 resin which enables you to print model like earlobe.
Shore A5 Rubber-ike resin
This resin is suitable for printing grip parts of artificial hand, organs model and more application required special softness. Low skin irritation.
Shore A13 Rubber-like resin
Same elasticity as former product, plus improved low skin irritation. Suitable for soft parts of robot.
Shore A50 Rubber-like resin
Same elasticity as former product, plus improved low skin irritation.
Heat Resistant Acrylic resin (Hard)
More lineups: Conductive acrylic resin, Conductive rubber-like resin, Lost wax resin
Material Data Sheet
| Product | Heat Resistant Acrylic resin |
|---|---|
| Flexural Modulus (GPa) | 27 |
| Appearance | Pale yellow transparent liquid |
| Softing Point (°C) | 178 |
| Water Absortion (% at 72h) | 0.1 |
| Product | Shore A50 rubber-like resin |
Shore A13 rubber-like resin |
Shore A5 rubber-like resin |
Shore A2 rubber-like resin |
Shore A25 rebounding resin |
|---|---|---|---|---|---|
| Flexural Modulus (MPa) | 50 | 8.2 | 2.8 | 0.8 | 1.0 |
| Tensile Strength (MPa) | 16 | 2.9 | 1.3 | 0.7 | 0.9 |
| Elongation at Break (%) | 250 | 300 | 345 | 395 | 290 |
| Appearance | Pale yellow transparent liquid | ||||
| Shore Hardness (A) HDA | 50 | 13 | 5 | 2 | 25 |
| Tg (°C) | 30 | 11 | 8 | 7 | -4 |
| Water Absortion (% at 72h) |
1.8 | 0.2 | < 0.1 | < 0.1 | TBA |
