Home Products About Us Inquiries Distributor   >>Japanese



Minimum pattern width (mm) 0.1 (4 mil)
Minimum millig width (mm) 0.1 (4 mil)
Working area (X/Y/Z) (mm) 350 x 250 x 25*8
(14" x 10" x 1")
Table size (X/Y) (mm) 460 x 450 (18" x 18")
Control axis X, Y, Z
Control motor 5 phase stepper motor
Resolution (µm) *4 4 (0.16 mil)
Maximum travel speed (mm/sec.) *1 80 (3.15")
Spindle speed (min-1)
Spindle motor
5,000 - 40,000 (model 40)
5,000 - 60,000 (model 60)
5,000 - 100,000 (model 100)
HF Spindle
Drilling (mm) 0.2 - 3.175 (8 - 125 mil)
Maximum drilling cycle (cycles/min) *2 80
Maximum drilling stroke (mm) 30 (1.18")
Tool change Manual / Single step tool change
Absolute Manual switching
Incremental Yes
Compressed air (Mpa) 0.5 (required for HP type)
Power consumption 100 / 240V, 50-60Hz, 250VA
Machine dimensions
W x D x H (mm)
620 x 505 x 420
(24" x 20" x 17")
Machine weight (kg) Approx. 42 (93 lbs)
Interface One USB or RS-232C port
(Additional USB required with optional fiducial camera)
Standard equipment Software: EASY CAD, Conversion + CAM
Options and accessories Fiducial positioning camera 30x
Vacuum table (VT-ABS)
Dust proof, Acoustic cabinet
Tool protrusion equipment
Ring-setter/ Precision ring-setter (manual)
Drilling ring
Connecting Cable (USB)
Vacuum cleaner
Starter kit
Connecting Cable (RS232C)
Magnifying glass 10x
Extention hose for Vacuum cleaner

Tools: End mills
Drill bit
Router bit

*1 Optimum speed for cutting depends on tool, material of board and so on.
*2 This is a repeat count of drill's up and down on the maximum stroke.
Optimum strokes depends on the diameter of tool.
*3 In case of 80 strokes, maximum drilling stroke shortens. (to be adjusted at the factory)
*4 The smallest traveling figures for ordering each 3 axis movement.
They do not represent the accuracy of axis positioning.
*8 z-axis stroke 30mm

MITS General Catalog

(PDF file / 1.8MB)

MITS Electronics


Contact us : Inquiry Form