With fine layer thickness, inclined surface or curved surface can be printed very smoothly. Objects with stick out feature also can be printed.
As MITS 3D printer adopted surface exposure using projector. Unlike laser scanning or FDM, one layer is printed as one face at a time. Therefore, no matter what the size of the objects, or number of objects to be created, printing speed is faster, and time to complete is easily calculated.
While most stereolithographic type of 3D printers requires large amount of resin to be put into resin pool, FLASH75 and M3DS requires small amount of resin to be put into resin pool. (FLASH75: 200cc / M3DS-100, 200: 350cc / M3DS-300: 800cc)
MITS 3D printer is environment friendly and does not use light source with mercury. Light source lifetime is about 20,000 hours (10 times more than mercury lamp. So you can save time and cost for changing lamp.
Resin can be colored by mixing dye or pigment. Different resins can be mixed each other. As Acrylic resin and rubber like resin can be mixed together, objects with high ductility can be printed. By changing the mixture ratio, you can have ductility of your choice.
Structure of machine is simple. So users can maintain by themselves. We also provide optional maintenance services for a fee.