Home Products About Us Inquiries Distributor   >>Japanese

Dry Film Laminator

This dry film laminator is designed for small company, schools, and R&D department. All commercial laminates for PCB manufacture and mould-etching part technique can be processed.

- The heating element is protected inside the cylinder and cannot be damaged from the outside.
- Temperature can be set between 20 and 130°C (The recommended control range is between 90 and 130°C)
- Electrically heated lamination rollers with uniform.
- Infinitely adjustable laminating speed.
- Manually adjustable lamination pressure.
- For all common dry film resists.
- Suitable for solder mask application.

Technical Data:
Lamination Width max 400mm
Lamination Speed 200-1200mm/min
Resist Tension Adjustable
Laminate Pressure Adjustable
Temperature range 20 - 120°C
Weight 38Kg
Size (W x D x H) 690 x 630 x 570mm
Power Supply 230V, 50Hz, 1.5 - 2.5kW

MITS Electronics


Contact us : Inquiry Form